? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. 1. when ordering, specify tolerance, termination and packaging codes: 0603hc-24nx jlw tolerance: g =2% j = 5% (table shows stock tolerances in bold.) termination: l = rohs compliant silver-palladium-platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: w =7 machine-ready reel. eia-481 punched paper tape (2000 parts per full reel). u = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter w instead. 2. inductance measured at 250 mhz using coilcraft smd-a fixture in agilent/hp 4286 impedance analyzer with coilcraft-provided correlation pieces. 3. tolerances in bold are stocked for immediate shipment. 4. q measured at 250 mhz using agilent/hp 4291a with agilent/hp 16193 test fixture. 5. srf measured using agilent/hp 8720d network analyzer and coilcraft smd-d test fixture. 6. dcr measured on micro-ohmmeter and coilcraft ccf858 test fixture. 7. current that causes a 20c temperature rise from 25c ambient. 8. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. document 218-1 revised 10/03/08 chip inductors - 0603hc series (1608) document 218-1 with their high current ratings and ultra-small size, these chip inductors are ideal for today?s high frequency, low voltage applications like mobile phones. they feature continuous current ratings up to 2.4 amps dc and will handle transient currents up to 50% higher. at low inductance values, their q factors are also higher than our standard 0603cs series. srf dcr inductance 2 percent q 900 mhz 1.7 ghz min 5 max 6 i rms 7 color part number 1 (nh) tolerance 3 min 4 l typ q typ l typ q typ (mhz) (ohms) (a) code 0603hc-1n6xjl_ 1.6 5 24 1.67 49 1.65 63 12500 0.030 2.4 black 0603hc-3n6xjl_ 3.6 5 24 3.65 70 3.75 90 5900 0.048 2.3 brown 0603hc-3n9xjl_ 3.9 5 25 3.74 70 3.90 90 5900 0.054 2.2 red 0603hc-6n8xjl_ 6.8 5 35 6.72 70 7.10 75 5800 0.054 2.1 orange 0603hc-7n5xjl_ 7.5 5 38 7.33 70 7.90 68 3700 0.059 2.1 yellow 0603hc-10nx_l_ 10 5,2 38 9.70 73 10.5 57 3700 0.071 2.0 green 0603hc-12nx_l_ 12 5,2 38 12.3 68 14.5 41 3000 0.075 2.0 blue 0603hc-15nx_l_ 15 5,2 38 15.5 65 17.6 40 2800 0.080 1.9 violet 0603hc-18nx_l_ 18 5,2 40 19.5 62 25.0 40 2800 0.099 1.9 gray 0603hc-22nx_l_ 22 5,2 42 24.0 61 31.5 26 2400 0.099 1.8 white 0603hc-24nx_l_ 24 5,2 42 25.8 55 35.0 21 2400 0.105 1.8 black high current designer?s kit c339 contains 10 of each of all 5% parts core material ceramic terminations rohs compliant silver-palladium-platinum-glass frit. weight 3.3 ? 3.7 mg ambient temperature ?40c to +125c with i rms current, +125c to +145c with derated current storage temperature component: ?40c to +155c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles temperature coefficient of inductance (tcl) +25 to +125 ppm/c moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) one per billion hours / one billion hours, calculated per telcordia sr-332 packaging 2000 per 7 reel. paper tape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing pcb washing only pure water or alcohol recommended
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. 0603hc (1608) chip inductors document 218-2 revised 10/03/08 document 218-2 typical l vs frequency high current a b overall c d terminal wraparound: approx 0.008/0,20 both ends i i j f f g h e terminal recommended land pattern pick and place material abcd max max max ref e f g h i j 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches 1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm 100 90 80 70 60 50 40 30 20 10 0 1 10 100 1000 10000 frequency (mhz) q factor 5.6 nh 3.6 nh 6.8 nh 15 nh 22 nh 0 10 20 30 1 10 100 1000 10000 frequency (mhz) inductance (nh) 3.6 nh 6.8 nh 15 nh 22 nh typical q vs frequency irms derating -40 -20 0 20 40 60 80 100 160 140 120 ambient temperature (c) percent of rated rms i 120 110 100 90 80 70 60 50 40 30 20 10 0 25c
|
